Blistered Trucks are here!  Each set comes pre-installed with our Blistered V3 Pivot Cups and Super Bushings. Blistered exclusive hardware is included in every set: 4 Black Blistered Locknuts for the wheels, and both Standard and Inverted Kingpins.
 
 
Installation instructions: First, remove the 4 screws from the baseplate. Next, insert the pivot cup from the bottom of the baseplate. Mount the trucks to your deck using the 4 screws. Now tighten the kingpin a bit (it will be too loose initially) and you're good to go. Please note that if you want to ride loose trucks you will need to install your own bushings. The included super bushings will work only for medium-tight ride on the Blistered Trucks, if you loosen them too much the hangar can pop out from the baseplate, which is solved by using a smaller bottom bushing.
This package also includes thick Inverted Black Kingpins that you can switch out the silver ones to. The black ones are the best! Plus, you'll find a set of skinny black kingpins with two locknuts, these are our Standard Kingpin conversion kit, included free with every set! Using two tools (with your trucks taken off of your board) you can install the Standard (instead of Inverted) kingpins.
 
Enjoy!